Search Results

Search found 35296 results on 1412 pages for '12 10'.

Page 588/1412 | < Previous Page | 584 585 586 587 588 589 590 591 592 593 594 595  | Next Page >

• Using VLC as RTSP server

  - by StackedCrooked

  I'm trying to figure out how to use the server capabilities of VLC. More specifically, how to export an SDP file when RTP streaming. In chapter 4 in the section related to RTP Streaming examples for server and client are given: vlc -vvv input_stream --sout '#rtp{dst=192.168.0.12,port=1234,sdp=rtsp://server.example.org:8080/test.sdp}' vlc rtsp://server.example.org:8080/test.sdp It's not very clear to me how to make it actually work. I have tried these two commands for server and client using two cmd instances: vlc -I rc screen:// --sout=#rtp{dst=127.0.0.1,port=4444,sdp=rtsp://localhost:8080/test.sdp} vlc -I rc rtsp://localhost:8080/test.sdp Invoking the second command causes the first one to crash. The second command shows the error message "could not connect to localhost:8080".

  Read the article

• How to install libv8 using a specific version of g++?

  - by Catfish

  I'm trying to install therubyracer gem for a rails project - http://stackoverflow.com/questions/13793533/unable-to-install-therubyracer-on-centos-errors-with-v8-and-gcc and i'm thinking that now that i installed g++44, that all i need to do is get gem install libv8 to use g++44 instead of g++. Is there a way to run gem install libv8 and to have it look at my updated g++ version? Or is there a way to set the default g++ to the g++44 location? some helpful output [root@allthingswebdesign current]# which g++ /usr/bin/g++ [root@allthingswebdesign current]# which g++44 /usr/bin/g++44 [root@allthingswebdesign current]# [root@allthingswebdesign current]# cd /usr/bin/ [root@allthingswebdesign bin]# ls -al g++* -rwxr-xr-x 4 root root 218432 May 10 2012 g++ -rwxr-xr-x 2 root root 263704 Feb 21 2012 g++44 lrwxrwxrwx 1 root root 12 Dec 9 17:21 g++-4.4 -> /usr/bin/g++

  Read the article

• How can I do Ubuntu Lucid Desktop installation with HTTP preseed?

  - by netvope

  Installation media: ubuntu-10.04-desktop-i386.iso I tried a lot of different boot parameters, but either the installer ignored the preseed configuration, or it boot itself directly as LiveCD. An example of the boot parameters I've tried: auto url=http://mydomain.com/path/preseed.cfg boot=casper only-ubiquity initrd=/casper/initrd.lz quiet splash -- If I remove only-ubiquity, it boots as a LiveCD. If I remove boot=casper, it won't boot. If I add vga=normal locale=en_US console-setup/layoutcode=us console-setup/ask_detect=false interface=auto, it still can't do automatic install. If I remove auto, it's the same. What is the correct boot parameters for launching such an installation? From the apache log of the server hosting preseed.cfg, I see that the installer has no problems fetching the preseed file. My preseed file is almost identical to the one at https://help.ubuntu.com/10.04/installation-guide/example-preseed.txt. Moreover, I have run debconf-set-selections -c preseed.cfg to ensure that the preseed file is correct.

  Read the article

• ZFS on Linux for RHEL/OEL NFS Sharing

  - by BBK

  I'm trying ZFS on Linux for Oracle Linux (OLE) 6.1 (Red Hat RHEL 6.1 compatible clone). I successfully compiled and installed spl and zfs on it for Oracle Unbreakable Kernel. Zfs is working and I created mirror by zpool create -f -o ashift=12 tank mirror sdb sdc Now I'm trying to share my zfs pool caled "tank/nfs" as mentioned at zfsonlinux site. zfs set sharenfs=on tank/nfs So I created tank/nfs and set nfs to on. Now I'm trying to mount nfs share at local host to test it by mount -t nfs4 127.0.0.1:/tank/nfs /mnt But I get mount.nfs4: mount system call failed So question is: How to share NFS Folder or iSCSI Volumes at OLE rightly and mount it with Linux Client via ZFS on Linux.

  Read the article

• Varnish VCL Reload Fails After Adding Second Backend

  - by Andy

  I have been running Varnish on my production server successfully for several weeks now. Now I'm trying to configure Varnish to use a second backend for certain requests. My original working VCL (/etc/varnish/default.vcl) begins like this: backend default { .host = "127.0.0.1"; .port = "8080"; } ...rest of VCL... And I'm changing it to: backend default { .host = "127.0.0.1"; .port = "8080"; } backend backend2 { .host = "12.34.56.78"; .port = "80"; } ...rest of VCL... When I reload the VCL file, I get the following: Command failed with error code 106 Failed to reload /etc/varnish/default.vcl. Any idea what the error could be, or how I can get more information on the problem?

  Read the article

• How to install nginx and install the configuration files too

  - by Burning the Codeigniter

  I've just completely uninstalled nginx 1.0.6 from my server (Ubuntu 11.04) using apt-get remove nginx rm -rf /etc/nginx/ rm -rf /usr/sbin/nginx rm /usr/share/man/man1/nginx.1.gz apt-get remove nginx* Now I want to install it again, however when starting nginx, I get errors such as: Restarting nginx: nginx: [emerg] open() "/etc/nginx/nginx.conf" failed (2: No such file or directory) Then I placed my own conf file, then I get a new error: Restarting nginx: nginx: [emerg] open() "/etc/nginx/mime.types" failed (2: No such file or directory) in /etc/nginx/nginx.conf:12 Now it seems that apt-get install nginx doesn't install it completely, I cleared the apt-get cache, doesn't seem to help. How can I get a full installation of nginx using apt-get?

  Read the article

• postfix relaying all mail through office365 problems

  - by amrith

  This is a rather long question with a long list of things tried and travails so please bear with me. The summary is this. I am able to relay email from ubuntu through office365 using postfix; the configuration works. It only works as one of the users; more specifically the user who authenticates against office365 is the only valid "from" More details follow. I have a machine in Amazon's cloud on which I run a bunch of jobs and would like to have statuses mailed over to me. I use office365 at work so I want to relay mail through office365. I'm most familiar with postfix so I used that as the MTA. Configuration is ubuntu 12.04LTS; I've installed postfix and mail-utils. For this example, let me say my company is "company.com" and the machine in question (through an elastic IP and a DNS entry) is called "plaything.company.com". hostname is set to "plaything.company.com", so is /etc/mailname On plaything, I have the following users registered alpha, bravo, and charlie. I have the following configuration files. alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all inet_protocols = ipv4 mailbox_size_limit = 0 mydestination = plaything.company.com, localhost.company.com, , localhost myhostname = plaything.company.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relayhost = [smtp.office365.com]:587 sender_canonical_maps = hash:/etc/postfix/sender_canonical smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_security_options = noanonymous smtp_sasl_tls_security_options = noanonymous smtp_tls_CAfile = /etc/ssl/certs/ca-certificates.crt smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes As the machine is called plaything.company.com I went through the exercise of registering all the appropriate DNS entries to make office365 recognize that I owned plaything.company.com and allowed me to create a user called [email protected] in office365. In office365, I setup [email protected] as having another email address of [email protected]. Then, I made the following sender_canonical [email protected] [email protected] I created a sasl_passwd file that reads: smtp.office365.com [email protected]:123456password123456 let's just say that the password for [email protected] is 1234...456 With all this setup, login as alpha and mail [email protected] Cc: Subject: test test and the whole thing works wonderfully. email gets sent off by postfix, TLS works like a champ, authenticates as daemon@... and [email protected] in Office365 gets an email message. The issue comes up when logged in as bravo to the machine. sender is [email protected] and office365 says: status=bounced (host smtp.office365.com[132.245.12.25] said: 550 5.7.1 Client does not have permissions to send as this sender (in reply to end of DATA command)) this is because I'm trying to send mail as bravo@... and authenticating with office365 as daemon@.... The reason it works with alpha@... is because in office365, I setup [email protected] as having another email address of [email protected]. In Postfix Relay to Office365, Miles Erickson answers the question thusly: Don't send mail to Office365 as a user from your Office365-hosted e-mail domain. Use a subdomain instead, e.g. [email protected] instead of [email protected]. It wouldn't hurt to set up an SPF record for services.mydomain.com or whatever you decide to use. Don't authenticate against mail.messaging.microsoft.com as an Office365 user. Just connect on port 25 and deliver the mail to your domain as any foreign SMTP agent would do. OK, I've done #1, I have those records on DNS but for the most part they are not relevant once Office365 recognizes that I own the domain. Here are those records: CNAME records: - msoid.plaything.company.com - autodiscover.plaything.company.com MX record: - plaything.company.com (plaything-company-com.mail.protection.outlook.com) TXT record: - plaything.company.com (v=spf1 include:spf.protection.outlook.com -all) I've tried #2 but no matter what I do, office365 just blows away the connection with "not authenticated". I can try even a simple telnet to port 25 and attempt to send and it doesn't work. 250 BY2PR01CA007.outlook.office365.com Hello [54.221.245.236] 530 5.7.1 Client was not authenticated Connection closed by foreign host. Is there someone out there who has this kind of a configuration working where multiple users on a linux machine are able to relay mail using postfix through office365? There has to be someone out there doing this who can tell me what is wrong with my setup ...

  Read the article

• I want to move columns in a gradebook based on the column header title to another gradebook

  - by Pat

  I have to average grades based on each objective for a new report card we have to complete this year. For example Column one has students names, each additional column will have the objective associated with the assignment. I would like to move the entire column to another sheet for each objective. Is there a formula or macro that will do that. For example objective 3.1A is in columns 2, 5, and 7, objective 3.2B is located in columns 1, 4, 10, and 12, objective 3.4c is in column 3, 6, 9, and 11. I would like to have a spreadsheet for each objective.

  Read the article

• MOSS Upload Size?

  - by littlegeek

  Hi In MOSS we have done all of this to increase the file upload size, reset iis but still doesnt want to play = anyone any advice. UPDATE Just seen the Scott Gu article - http://weblogs.asp.net/pscott/archive/2009/02/26/404-errors-with-fileupload-with-iis7.aspx and JS example http://msmvps.com/blogs/cgross/archive/2009/02/25/large-files-in-sbs-2008-s-companyweb.aspx So need to say this is II6 on win2k3 Update 2 still not working at a loss anyone help? In SharePoint 3.0 Central Adminisration, Application Management tab, and Web application general settings configure the Maximum upload size to a maximum of 2047 MB. - We set ours to 250MB In Internet Information Services on the properties of the virtual server increase the Connection Timeout to greater than default 120 seconds depending on the time to upload large files in your environment for example, 360 seconds. - We set ours to 600 Secs Configure the web.config for the _layouts web.config with On the SharePoint server change C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\LAYOUTS\web.config with an executionTimeout appropriate for the file size you are uploading. An example is included below. from: to: executionTimeout="999999" maxRequestLength="2097151" /

  Read the article

• What does %st mean in top?

  - by Ben

  Here is an example from my top: Cpu(s): 6.0%us, 3.0%sy, 0.0%ni, 78.7%id, 0.0%wa, 0.0%hi, 0.3%si, 12.0%st I am trying to figure out the significance of the %st field. I read that it means steal cpu and it represents time spent by the hypervisor, but I want to know what that actually means to me. Does it mean I may be on a busy physical server and someone else is using too much CPU on the server and they are taking from my VM? If I am using EBS could it be related to handling EBS I/O at the hypervisor level? Is it related to things running on my VM or is it completely unaffected by me?

  Read the article

• Power supply triggered to start by another power supply

  - by steampowered

  I am building a raid array in a separate enclosure. I will be putting an empty tower case next to an existing tower computer, and this second tower case will only hold hard drives. There are many solutions for connecting the drives in the second case to the raid card in the first case (SFF-8088 and SFF-8087 cables). But I prefer not to run power from the first case to the second case. Can I use a power supply in the first tower case and cause it to start the power supply in the second case based on an indication from power in the first tower case's power supply? Maybe run a 12 volt cable from the first case to the power supply on the second case only for the purpose of initiating the second power supply.

  Read the article

• MySQL is hogging my server resources

  - by Reacen

  Does anyone have any idea of what can cause this weird behaviour and how I go about fixing it? This is all coming from MySQL only (both RAM and CPU usage), for about 10 minutes after I reboot my Java game server (that has a pool of 256 connections). There are not that many queries and I think it may be more of a MySQL misconfiguration problem. My server: 3.20 GHz * 6 core / 24 GB RAM / 64 bit Windows Server 2003. My game server: Java server, with 256 MySQL connections pool (MyISAM engine), about 500,000 accounts, and 9 million rows of game items in database and about 3,000 players are connected. After about 15 minutes of the game server reboot, the server resumes its stability and CPU usage drop down to 1% ~ 5% and memory to 6 GB. Here is a copy of my MySQL configuration. Also, any advice about my MySQL configuration will be appreciated. I really set it up almost at random. # Example MySQL config file for very large systems. # # This is for a large system with memory of 1G-2G where the system runs mainly # MySQL. # # You can copy this file to # /etc/my.cnf to set global options, # mysql-data-dir/my.cnf to set server-specific options (in this # installation this directory is C:\mysql\data) or # ~/.my.cnf to set user-specific options. # # In this file, you can use all long options that a program supports. # If you want to know which options a program supports, run the program # with the "--help" option. # The following options will be passed to all MySQL clients [client] #password = your_password port = 3306 socket = /tmp/mysql.sock # Here follows entries for some specific programs # The MySQL server [mysqld] #log=c:\mysql.log port = 3306 socket = /tmp/mysql.sock skip-locking key_buffer_size = 2572M max_allowed_packet = 64M table_open_cache = 512 sort_buffer_size = 128M read_buffer_size = 128M read_rnd_buffer_size = 128M myisam_sort_buffer_size = 500M thread_cache_size = 32 query_cache_size = 1948M # Try number of CPU's*2 for thread_concurrency thread_concurrency = 12 max_connections = 5000 # Don't listen on a TCP/IP port at all. This can be a security enhancement, # if all processes that need to connect to mysqld run on the same host. # All interaction with mysqld must be made via Unix sockets or named pipes. # Note that using this option without enabling named pipes on Windows # (via the "enable-named-pipe" option) will render mysqld useless! # #skip-networking # Replication Master Server (default) # binary logging is required for replication log-bin=mysql-bin # required unique id between 1 and 2^32 - 1 # defaults to 1 if master-host is not set # but will not function as a master if omitted server-id = 1 # Replication Slave (comment out master section to use this) # # To configure this host as a replication slave, you can choose between # two methods : # # 1) Use the CHANGE MASTER TO command (fully described in our manual) - # the syntax is: # # CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>, # MASTER_USER=<user>, MASTER_PASSWORD=<password> ; # # where you replace <host>, <user>, <password> by quoted strings and # <port> by the master's port number (3306 by default). # # Example: # # CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306, # MASTER_USER='joe', MASTER_PASSWORD='secret'; # # OR # # 2) Set the variables below. However, in case you choose this method, then # start replication for the first time (even unsuccessfully, for example # if you mistyped the password in master-password and the slave fails to # connect), the slave will create a master.info file, and any later # change in this file to the variables' values below will be ignored and # overridden by the content of the master.info file, unless you shutdown # the slave server, delete master.info and restart the slaver server. # For that reason, you may want to leave the lines below untouched # (commented) and instead use CHANGE MASTER TO (see above) # # required unique id between 2 and 2^32 - 1 # (and different from the master) # defaults to 2 if master-host is set # but will not function as a slave if omitted #server-id = 2 # # The replication master for this slave - required #master-host = <hostname> # # The username the slave will use for authentication when connecting # to the master - required #master-user = <username> # # The password the slave will authenticate with when connecting to # the master - required #master-password = <password> # # The port the master is listening on. # optional - defaults to 3306 #master-port = <port> # # binary logging - not required for slaves, but recommended #log-bin=mysql-bin # # binary logging format - mixed recommended #binlog_format=mixed # Point the following paths to different dedicated disks #tmpdir = /tmp/ #log-update = /path-to-dedicated-directory/hostname # Uncomment the following if you are using InnoDB tables #innodb_data_home_dir = C:\mysql\data/ #innodb_data_file_path = ibdata1:2000M;ibdata2:10M:autoextend #innodb_log_group_home_dir = C:\mysql\data/ # You can set .._buffer_pool_size up to 50 - 80 % # of RAM but beware of setting memory usage too high #innodb_buffer_pool_size = 384M #innodb_additional_mem_pool_size = 20M # Set .._log_file_size to 25 % of buffer pool size #innodb_log_file_size = 100M #innodb_log_buffer_size = 8M #innodb_flush_log_at_trx_commit = 1 #innodb_lock_wait_timeout = 50 [mysqldump] quick max_allowed_packet = 64M [mysql] no-auto-rehash # Remove the next comment character if you are not familiar with SQL #safe-updates [myisamchk] key_buffer_size = 256M sort_buffer_size = 256M read_buffer = 8M write_buffer = 8M [mysqlhotcopy] interactive-timeout

  Read the article

• What CPU hardware performance counter tool do you guys use?

  - by Hao Shen

  I just want to know the popular tool that I can use. Originally, I used Perfmon2. However, recently, I installed the lastest Ubuntu 12 on my Ivy Bridge i7 machine. Then there is some compilation error for the Pfmon. :< From here http://comments.gmane.org/gmane.comp.linux.perfmon2.devel/3255 , it seems that the Perfmon2 will not work after the kernel 2.6.30. So it suggests to use perf tool. I just want to confirm is there any popular application level performance counter monitor tool which can be used for the later kernel version?

  Read the article

• Ubuntu 11.10, using wget/curl fails with ssl

  - by Greg Spiers

  Note: See edit 3 for solution On a completely new install of Ubuntu I'm getting the following errors when using wget: wget https://test.sagepay.com --2012-03-27 12:55:12-- https://test.sagepay.com/ Resolving test.sagepay.com... 195.170.169.8 Connecting to test.sagepay.com|195.170.169.8|:443... connected. ERROR: cannot verify test.sagepay.com's certificate, issued by `/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)06/CN=VeriSign Class 3 Extended Validation SSL SGC CA': Unable to locally verify the issuer's authority. To connect to test.sagepay.com insecurely, use `--no-check-certificate'. I've tried installing ca-certificates and configuring the ca-certs and they appear to all be setup in /etc/ssl/certs. The same issue exists for cURL: curl https://test.sagepay.com curl: (60) SSL certificate problem, verify that the CA cert is OK. Details: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed Which leads me to believe it's something wrong with openssl server wide. wget and curl both work correctly locally on OSX and I have confirmed with a few people that it's working on their servers so I suspect it's nothing to do with the server I'm attempting to connect to. Any ideas or suggestions on things to try to narrow it down? Thank you Edit As requested verbose output from curl curl -Iv https://test.sagepay.com * About to connect() to test.sagepay.com port 443 (#0) * Trying 195.170.169.8... connected * Connected to test.sagepay.com (195.170.169.8) port 443 (#0) * successfully set certificate verify locations: * CAfile: none CApath: /etc/ssl/certs * SSLv3, TLS handshake, Client hello (1): * SSLv3, TLS handshake, Server hello (2): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS alert, Server hello (2): * SSL certificate problem, verify that the CA cert is OK. Details: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed * Closing connection #0 curl: (60) SSL certificate problem, verify that the CA cert is OK. Details: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed More details here: http://curl.haxx.se/docs/sslcerts.html Edit 2 Using the hash from your comment I see this: ubuntu@srv-tf6sq:/etc/ssl/certs$ ls -al 7651b327.0 lrwxrwxrwx 1 root root 59 2012-03-27 12:48 7651b327.0 -> Verisign_Class_3_Public_Primary_Certification_Authority.pem ubuntu@srv-tf6sq:/etc/ssl/certs$ ls -al Verisign_Class_3_Public_Primary_Certification_Authority.pem lrwxrwxrwx 1 root root 94 2012-01-18 07:21 Verisign_Class_3_Public_Primary_Certification_Authority.pem -> /usr/share/ca-certificates/mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt ubuntu@srv-tf6sq:/etc/ssl/certs$ ls -al /usr/share/ca-certificates/mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt -rw-r--r-- 1 root root 834 2011-09-28 14:53 /usr/share/ca-certificates/mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt ubuntu@srv-tf6sq:/etc/ssl/certs$ more /usr/share/ca-certificates/mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt -----BEGIN CERTIFICATE----- MIICPDCCAaUCEDyRMcsf9tAbDpq40ES/Er4wDQYJKoZIhvcNAQEFBQAwXzELMAkG A1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFz cyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTk2 MDEyOTAwMDAwMFoXDTI4MDgwMjIzNTk1OVowXzELMAkGA1UEBhMCVVMxFzAVBgNV BAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAzIFB1YmxpYyBQcmlt YXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIGfMA0GCSqGSIb3DQEBAQUAA4GN ADCBiQKBgQDJXFme8huKARS0EN8EQNvjV69qRUCPhAwL0TPZ2RHP7gJYHyX3KqhE BarsAx94f56TuZoAqiN91qyFomNFx3InzPRMxnVx0jnvT0Lwdd8KkMaOIG+YD/is I19wKTakyYbnsZogy1Olhec9vn2a/iRFM9x2Fe0PonFkTGUugWhFpwIDAQABMA0G CSqGSIb3DQEBBQUAA4GBABByUqkFFBkyCEHwxWsKzH4PIRnN5GfcX6kb5sroc50i 2JhucwNhkcV8sEVAbkSdjbCxlnRhLQ2pRdKkkirWmnWXbj9T/UWZYB2oK0z5XqcJ 2HUw19JlYD1n1khVdWk/kfVIC0dpImmClr7JyDiGSnoscxlIaU5rfGW/D/xwzoiQ -----END CERTIFICATE----- But doing the steps myself I end up with a different hash: strace -o /tmp/foo.out curl -Iv https://test.sagepay.com and grep ssl /tmp/foo.out open("/lib/x86_64-linux-gnu/libssl.so.1.0.0", O_RDONLY) = 3 stat("/etc/ssl/certs/415660c1.0", {st_mode=S_IFREG|0644, st_size=834, ...}) = 0 open("/etc/ssl/certs/415660c1.0", O_RDONLY) = 4 stat("/etc/ssl/certs/415660c1.1", 0x7fff7dab07b0) = -1 ENOENT (No such file or directory) readlink -f /etc/ssl/certs/415660c1.0 /usr/share/ca-certificates/mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt more /usr/share/ca-certificates/mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt -----BEGIN CERTIFICATE----- MIICPDCCAaUCEDyRMcsf9tAbDpq40ES/Er4wDQYJKoZIhvcNAQEFBQAwXzELMAkG A1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFz cyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTk2 MDEyOTAwMDAwMFoXDTI4MDgwMjIzNTk1OVowXzELMAkGA1UEBhMCVVMxFzAVBgNV BAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAzIFB1YmxpYyBQcmlt YXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIGfMA0GCSqGSIb3DQEBAQUAA4GN ADCBiQKBgQDJXFme8huKARS0EN8EQNvjV69qRUCPhAwL0TPZ2RHP7gJYHyX3KqhE BarsAx94f56TuZoAqiN91qyFomNFx3InzPRMxnVx0jnvT0Lwdd8KkMaOIG+YD/is I19wKTakyYbnsZogy1Olhec9vn2a/iRFM9x2Fe0PonFkTGUugWhFpwIDAQABMA0G CSqGSIb3DQEBBQUAA4GBABByUqkFFBkyCEHwxWsKzH4PIRnN5GfcX6kb5sroc50i 2JhucwNhkcV8sEVAbkSdjbCxlnRhLQ2pRdKkkirWmnWXbj9T/UWZYB2oK0z5XqcJ 2HUw19JlYD1n1khVdWk/kfVIC0dpImmClr7JyDiGSnoscxlIaU5rfGW/D/xwzoiQ -----END CERTIFICATE----- Any other ideas? Thank you for the help so far :) Edit 3 So it turns out that installing the ca-certificates package didn't install the one that I needed. I found this post about certificates being presented out of order. This seems to be the case with my request to sagepay. The solution ended up being to install another CA certificate from Verisign. I'm not sure why this fixes the issue with it being out of order but it does, but I suspect the out of order issue really isn't a problem at all and it was infact because I was missing a certificate all along. The additional certificate is available in that post but I didn't want to blindly trust it. I've looked at the list of CA certificates from cURL's site and it is listed there so I do trust it. The certificate: Verisign Class 3 Public Primary Certification Authority ======================================================= -----BEGIN CERTIFICATE----- MIICPDCCAaUCEHC65B0Q2Sk0tjjKewPMur8wDQYJKoZIhvcNAQECBQAwXzELMAkGA1UEBhMCVVMx FzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAzIFB1YmxpYyBQcmltYXJ5 IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTk2MDEyOTAwMDAwMFoXDTI4MDgwMTIzNTk1OVow XzELMAkGA1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAz IFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIGfMA0GCSqGSIb3DQEBAQUA A4GNADCBiQKBgQDJXFme8huKARS0EN8EQNvjV69qRUCPhAwL0TPZ2RHP7gJYHyX3KqhEBarsAx94 f56TuZoAqiN91qyFomNFx3InzPRMxnVx0jnvT0Lwdd8KkMaOIG+YD/isI19wKTakyYbnsZogy1Ol hec9vn2a/iRFM9x2Fe0PonFkTGUugWhFpwIDAQABMA0GCSqGSIb3DQEBAgUAA4GBALtMEivPLCYA TxQT3ab7/AoRhIzzKBxnki98tsX63/Dolbwdj2wsqFHMc9ikwFPwTtYmwHYBV4GSXiHx0bH/59Ah WM1pF+NEHJwZRDmJXNycAA9WjQKZ7aKQRUzkuxCkPfAyAw7xzvjoyVGM5mKf5p/AfbdynMk2Omuf Tqj/ZA1k -----END CERTIFICATE----- I put this in a file in: /usr/share/ca-certificates/curl/Verisign_Class_3_Public_Primary_Certification_Authority-from_cURL.crt I then modified the /etc/ca-certificates.conf and added the following line at the end: curl/Verisign_Class_3_Public_Primary_Certification_Authority-from_cURL.crt After that I ran the command: sudo update-ca-certificates Looking into the /etc/ssl/certs directory I see it correctly linked: ls -al | grep cURL lrwxrwxrwx 1 root root 69 2012-03-27 16:03 415660c1.0 -> Verisign_Class_3_Public_Primary_Certification_Authority-from_cURL.pem lrwxrwxrwx 1 root root 69 2012-03-27 16:03 7651b327.0 -> Verisign_Class_3_Public_Primary_Certification_Authority-from_cURL.pem lrwxrwxrwx 1 root root 101 2012-03-27 16:03 Verisign_Class_3_Public_Primary_Certification_Authority-from_cURL.pem -> /usr/share/ca-certificates/curl/Verisign_Class_3_Public_Primary_Certification_Authority-from_cURL.crt And everything works! curl -I https://test.sagepay.com HTTP/1.1 200 OK...

  Read the article

• what is acceptable datastore latency on VMware ESXi host?

  - by BeowulfNode42

  Looking at our performance figures on our existing VMware ESXi 4.1 host at the Datastore/Real-time performance data Write Latency Avg 14 ms Max 41 ms Read Latency Avg 4.5 ms Max 12 ms People don't seem to be complaining too much about it being slow with those numbers. But how much higher could they get before people found it to be a problem? We are reviewing our head office systems due to running low on storage space, and are tossing up between buying a 2nd VM host with DAS or buying some sort of NAS for SMB file shares in the near term and maybe running VMs from it in the longer term. Currently we have just under 40 staff at head office with 9 smaller branches spread across the country. Head office is runnning in an MS RDS session based environment with linux ERP and mail systems. In total 22 VMs on a single host with DAS made from a RAID 10 made of 6x 15k SAS disks.

  Read the article

• does ping command to a dns name uses DNS PTR type messages?

  - by TiagoM

  Okay I cant understand this, when I try to ping to a machine on my network using the name associated I get a response from that machine, thats normal.. But there are messages that the sender sends to the top machine (SOA) that I dont understand.. First he sends a type A and gets a response with the IP associated to the name used on the ping command, but after that.. the sender only sends (before each ping) messages of type PTR to the (SOA) Saying this: Standar query 0xf66c PTR 12.45.168.192.in-addr.arpa and SOA respond with: Standard query response 0xf66c No such name And before each ping they do this, I dont know why... I notice this using wireshark, thanks alot again for accept me here, being able to get some answer :)

  Read the article

• Project Server 2007 install issue - ProjectEventService won't start

  - by Brian Meinertz

  Trying to install PS2007 with SP1 on Server 2003. The install goes fine, but when running the SharePoint Configuration Wizard, it fails at stage 6 of 12 with the error: Failed to register SharePoint Services. An exception of type System.InvalidOperationException was thrown. Additional exception information: Cannot start service ProjectEventService on computer '.'. From the PSCDiagnostics log: Exception: System.InvalidOperationException: Cannot start service ProjectEventService on computer '.'. --- System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion. The ProjectEventService (Microsoft Office Project Server Event) won't even start manually using the Network Service account. Starting the service with a domain account works, but subsequently running the Config Wizard causes the service to be removed and re-provisioned to run using the Network Service account, which again fails. Presumably Network Service needs elevated permissions, but even adding it to the local Admin group makes no difference. Anyone come across this sort of issue before?

  Read the article

• What are good values for PSU voltages?

  - by earlz

  Hello, I have an odd computer I'm trying to fix that will crash only during the setup of an OS(crashes on every OS I've tried so far) It's not overheating and it is stripped down as much as possible and I've tried multiple harddrives, and memtest86+ can run on it for 3 hours without a crash or fail. So, I was a bit stumped and was looking in the BIOS for possible causes and found a hardware monitor that shows PSU voltages. They are: VCORE: 1.432V 3.3V: 3.136V 5V: 5.273 12V: 12.144V I thought the 3.3V looked a little low, but I'm not really sure on how "bad" that is. So, what are the good ranges for the voltages on each CPU rail?

  Read the article

• PostgreSQL timezone does not match system timezone

  - by Martin C.

  I have several PostgreSQL 9.2 installations where the timezone used by PostgreSQL is GMT, despite the entire system being "Europe/Vienna". I double-checked that postgresql.conf does not contain timezone setting, so according to the documentation it should fallback to the system's timezone. However, # su -s /bin/bash postgres -c "psql mydb" mydb=# show timezone; TimeZone ---------- GMT (1 row) mydb=# select now(); now ------------------------------- 2013-11-12 08:14:21.697622+00 (1 row) Any hints, where the GMT timezone could come from? The system user does not have TZ set and the /etc/timezone and /etc/timeinfo seem to be configured correctly. # cat /etc/timezone Europe/Vienna # date Tue Nov 12 09:15:42 CET 2013 Any hints are appreciated, thanks in advance!

  Read the article

• Is it safe to disable nmi_watchdog?

  - by Rayne

  I'm using RHEL 6 (kernel 2.6.32-131) and I'm trying to start oprofile, but I keep getting an error. My oprofile version is 0.9.6-12. I was able to successfully do opcontrol --init But when I did a opcontrol --start --no-vmlinux I got the error Using default event: CPU_CLK_UNHALTED:100000:0:1:1 Error: counter 0 not available nmi_watchdog using this resource ? Try: opcontrol --deinit echo 0 > /proc/sys/kernel/nmi_watchdog I don't know if it's safe for me to do this? For what I googled, it seems that nmi_watchdog is used to reboot the system if it hangs, and that sounds like something I want. Also, grep NMI /proc/interrupts shows a bunch of numbers, which I guess indicates that nmi_watchdog is already running? How can I run both oprofile and nmi_watchdog?

  Read the article

• How can I do Ubuntu Lucid Desktop installation with HTTP preseed file and desktop installation CD?

  - by netvope

  Installation media: ubuntu-10.04-desktop-i386.iso I tried a lot of different boot parameters, but either the installer ignored the preseed configuration, or it boot itself directly as LiveCD. An example of the boot parameters I've tried: auto url=http://mydomain.com/path/preseed.cfg boot=casper only-ubiquity initrd=/casper/initrd.lz quiet splash -- If I remove only-ubiquity, it boots as a LiveCD. If I remove boot=casper, it won't boot. If I add vga=normal locale=en_US console-setup/layoutcode=us console-setup/ask_detect=false interface=auto, it still can't do automatic install. If I remove auto, it's the same. What am I missing? From the apache log of the server hosting preseed.cfg, I see that the installer has no problems fetching the preseed file. My preseed file is almost identical to the one at https://help.ubuntu.com/10.04/installation-guide/example-preseed.txt. Moreover, I have run debconf-set-selections -c preseed.cfg to ensure that the preseed file is correct. Any ideas?

  Read the article

• Laptop LCD Screen Flickering

  - by BSchlinker

  I recognize this is most likely not a software error and likely lies in one of the hardware components. However, about 3 months ago I replaced the LCD screen on this laptop. The company which I bought it through provided a 12 month warranty. Before I contact them, I would like to verify that the problem is most likely the LCD screen and not the inverter. Any comments? I recognize its impossible to diagnose hardware remotely, but it would be nice to know if there is a high probability it could be a component other then the LCD screen.

  Read the article

• mac osx cannot connect to windows 7 machine

  - by Binary X

  I have a Mac OSX (Snow Leopard 10.6.6) setup on a network with several Windows 7 machines. When trying to place a large file on a Windows share the connection to the Windows share gets lost and I am unable to reconnect until I reboot the Mac. I know this is on the Windows side because the Mac can connect and transfer files to Server 2008 and XP without issue. Looking in the log file I see this message SharePointBrowser::handleOpenCallBack returned 12 I have tried restarting the com.apple.netauth.sysagent service but that did not resolve the situation. I can do an nslookup to the Windows 7 machine, but trying to ping the machine by hostname always gives a hostname lookup failure (I can ping via IP address). I cannot connect to the machine via IP adress either. Any help would be appreciated.

  Read the article

• What is causing the unusual high load average and IOwait?

  - by James

  I noticed on Tuesday night of last week, the load average went up sharply and it seemed abnormal since the traffic is small. Usually, the numbers usually average around .40 or lower and my server stuff (mysql, php and apache) are optimized. I noticed that the IOWait is unusually high even though the processes is barely using any CPU. top - 01:44:39 up 1 day, 21:13, 1 user, load average: 1.41, 1.09, 0.86 Tasks: 60 total, 1 running, 59 sleeping, 0 stopped, 0 zombie Cpu0 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu1 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu2 : 0.0%us, 0.3%sy, 0.0%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu3 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu4 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu5 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu6 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu7 : 0.0%us, 0.0%sy, 0.0%ni, 91.5%id, 8.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1048576k total, 331944k used, 716632k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 2468 1376 1140 S 0 0.1 0:00.92 init 1656 root 15 0 13652 5212 664 S 0 0.5 0:00.00 apache2 9323 root 18 0 13652 5212 664 S 0 0.5 0:00.00 apache2 10079 root 18 0 3972 1248 972 S 0 0.1 0:00.00 su 10080 root 15 0 4612 1956 1448 S 0 0.2 0:00.01 bash 11298 root 15 0 13652 5212 664 S 0 0.5 0:00.00 apache2 11778 chikorit 15 0 2344 1092 884 S 0 0.1 0:00.05 top 15384 root 18 0 17544 13m 1568 S 0 1.3 0:02.28 miniserv.pl 15585 root 15 0 8280 2736 2168 S 0 0.3 0:00.02 sshd 15608 chikorit 15 0 8280 1436 860 S 0 0.1 0:00.02 sshd Here is the VMStat procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 1 0 0 768644 0 0 0 0 14 23 0 10 1 0 99 0 IOStat - Nothing unusal Total DISK READ: 67.13 K/s | Total DISK WRITE: 0.00 B/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 19496 be/4 chikorit 11.85 K/s 0.00 B/s 0.00 % 0.00 % apache2 -k start 19501 be/4 mysql 3.95 K/s 0.00 B/s 0.00 % 0.00 % mysqld 19568 be/4 chikorit 11.85 K/s 0.00 B/s 0.00 % 0.00 % apache2 -k start 19569 be/4 chikorit 11.85 K/s 0.00 B/s 0.00 % 0.00 % apache2 -k start 19570 be/4 chikorit 11.85 K/s 0.00 B/s 0.00 % 0.00 % apache2 -k start 19571 be/4 chikorit 7.90 K/s 0.00 B/s 0.00 % 0.00 % apache2 -k start 19573 be/4 chikorit 7.90 K/s 0.00 B/s 0.00 % 0.00 % apache2 -k start 1 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % init 11778 be/4 chikorit 0.00 B/s 0.00 B/s 0.00 % 0.00 % top 19470 be/4 mysql 0.00 B/s 0.00 B/s 0.00 % 0.00 % mysqld Load Average Chart - http://i.stack.imgur.com/kYsD0.png I want to be sure if this is not a MySQL problem before making sure. Also, this is a Ubuntu 10.04 LTS Server on OpenVZ. Edit: This will probably give a good picture on the IO Wait top - 22:12:22 up 17:41, 1 user, load average: 1.10, 1.09, 0.93 Tasks: 33 total, 1 running, 32 sleeping, 0 stopped, 0 zombie Cpu(s): 0.6%us, 0.2%sy, 0.0%ni, 89.0%id, 10.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1048576k total, 260708k used, 787868k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 2468 1376 1140 S 0 0.1 0:00.88 init 5849 root 15 0 12336 4028 668 S 0 0.4 0:00.00 apache2 8063 root 15 0 12336 4028 668 S 0 0.4 0:00.00 apache2 9732 root 16 0 8280 2728 2168 S 0 0.3 0:00.02 sshd 9746 chikorit 18 0 8412 1444 864 S 0 0.1 0:01.10 sshd 9747 chikorit 18 0 4576 1960 1488 S 0 0.2 0:00.24 bash 13706 chikorit 15 0 2344 1088 884 R 0 0.1 0:00.03 top 15745 chikorit 15 0 12968 5108 1280 S 0 0.5 0:00.00 apache2 15751 chikorit 15 0 72184 25m 18m S 0 2.5 0:00.37 php5-fpm 15790 chikorit 18 0 12472 4640 1192 S 0 0.4 0:00.00 apache2 15797 chikorit 15 0 72888 23m 16m S 0 2.3 0:00.06 php5-fpm 16038 root 15 0 67772 2848 592 D 0 0.3 0:00.00 php5-fpm 16309 syslog 18 0 24084 1316 992 S 0 0.1 0:00.07 rsyslogd 16316 root 15 0 5472 908 500 S 0 0.1 0:00.00 sshd 16326 root 15 0 2304 908 712 S 0 0.1 0:00.02 cron 17464 root 15 0 10252 7560 856 D 0 0.7 0:01.88 psad 17466 root 18 0 1684 276 208 S 0 0.0 0:00.31 psadwatchd 17559 root 18 0 11444 2020 732 S 0 0.2 0:00.47 sendmail-mta 17688 root 15 0 10252 5388 1136 S 0 0.5 0:03.81 python 17752 teamspea 19 0 44648 7308 4676 S 0 0.7 1:09.70 ts3server_linux 18098 root 15 0 12336 6380 3032 S 0 0.6 0:00.47 apache2 18099 chikorit 18 0 10368 2536 464 S 0 0.2 0:00.00 apache2 18120 ntp 15 0 4336 1316 984 S 0 0.1 0:00.87 ntpd 18379 root 15 0 12336 4028 668 S 0 0.4 0:00.00 apache2 18387 mysql 15 0 62796 36m 5864 S 0 3.6 1:43.26 mysqld 19584 root 15 0 12336 4028 668 S 0 0.4 0:00.02 apache2 22498 root 16 0 12336 4028 668 S 0 0.4 0:00.00 apache2 24260 root 15 0 67772 3612 1356 S 0 0.3 0:00.22 php5-fpm 27712 root 15 0 12336 4028 668 S 0 0.4 0:00.00 apache2 27730 root 15 0 12336 4028 668 S 0 0.4 0:00.00 apache2 30343 root 15 0 12336 4028 668 S 0 0.4 0:00.00 apache2 30366 root 15 0 12336 4028 668 S 0 0.4 0:00.00 apache2

  Read the article

• OSX: Python packages fail to install, error message "/usr/local/bin: File Exists"

  - by kylehotchkiss

  I keep trying to install django and other python packages, and I keep getting the exact same error message: Installing django-admin.py script to /usr/local/bin error: /usr/local/bin: File exists So I look to make sure that my /usr/local folder is okay. At first glance it appears okay, until I try cd-ing into my bin. It says it can't because it's not a directory. Peculiar, I thought, so then I tried a Anchorage:local khotchkiss$ ls -a -l total 26168 drwxr-xr-x 6 root wheel 204 Dec 26 20:18 . drwxr-xr-x@ 14 root wheel 476 Feb 24 12:54 .. -rwxr-xr-x@ 1 root wheel 13395080 Oct 22 23:04 bin drwxr-xr-x 8 root wheel 272 Dec 26 20:18 git drwxr-xr-x 4 root wheel 136 Dec 18 11:31 include drwxr-xr-x 12 root wheel 408 Dec 18 11:31 lib And haven't a clue of what the 'bin' is, why its so large, and why its preventing me from installing python packages. Any clue?

  Read the article

< Previous Page | 584 585 586 587 588 589 590 591 592 593 594 595  | Next Page >